If defects are found on the wire surface and they may cause damage to the performance of final products, shaving dies are used to remove (shave off) them.

2. Advantages:

These dies have a long lifespan, they enable shorter preparation time and reduce the amount of wasted wire materials.
The lifespan of these dies is 50 to100 times longer than that of dies made of cemented carbide.
These dies can shave wires to give them superior surface conditions

inches	mm	ADDMA	Maximum Diameter
0.0039-0.0157	0.100-0.400	D6	0.4
0.0079-0.0315	0.200-0.800	D12	0.8
0.0079-0.0394	0.200-1.000	D12	1.0
0.0197-0.0591	0.500-1.500	D15	1.5
0.0197-0.0591	0.500-1.500	D15	1.5
0.0315-0.0787	0.800-2.000	D18	2.0
0.0315-0.0787	0.800-2.000	D18	2.0
0.0472-0.1181	1.200-3.100	D21	3.1
0.0472-0.1181	1.200-3.100	D21	3.1
0.0591-0.1732	1.500-4.400	D24	4.4
0.0591-0.1732	2.000-4.400	D24	4.4
0.1299-0.2126	3.300-5.400	D27	5.4
0.1299-0.2183	3.300-5.800	D27	5.8
0.2008-0.2992	5.100-7.600	D30	7.6
0.3150-0.4331	8.000-11.000	D33	11.0
0.3150-0.4409	8.000-11.200	D30	11.2
0.3150-0.4724	8.000-12.000	D33	12.0
0.3150-0.4921	8.000-12.500	D33	12.5
0.3150-0.5000	8.000-12.700	D36	12.7

0.200mm To 1.000mm Wire Drawing Die Material Shaving Dies

Diamond Drawing Dies

PCD Drawing Dies

Wire Drawing Dies

PDC Drill Bit

PDC Cutters

PCD Cutting Tool Blanks

Synthetic Diamond Powder

Vitrified Diamond Grinding Wheel

Resin Diamond Grinding Wheel

Metal Bond Diamond Grinding Wheel

PCD Saw Blades

Coal Mining Drill Bits

Matrix PDC Bit

PDC Core Bit

0.200mm To 1.000mm Wire Drawing Die Material Shaving Dies

wire drawing dies

wire drawing die polishing machine

round needles for microblading