ME & WE
ZHANGYUXIN ZHANGYUXIN
Add to Cart
PCD Tin Coating Dies, Wire Drawing Dies
1. Description:
PCD(Polycrystalline Diamond) Tin Coating Dies are available. Each blank of the Tin Coating Die is selected strictly to ensure there are no crack and impurities. Advanced machines and complete production processes make the Tin Coating Dies to be accurate, consistent.
2. Specifications:
Available Sizes: 0.3mm~3.0 mm
| inches | mm | ADDMA | Maximum Diameter |
| 0.0039-0.0157 | 0.100-0.400 | D6 | 0.4 |
| 0.0079-0.0315 | 0.200-0.800 | D12 | 0.8 |
| 0.0079-0.0394 | 0.200-1.000 | D12 | 1.0 |
| 0.0197-0.0591 | 0.500-1.500 | D15 | 1.5 |
| 0.0197-0.0591 | 0.500-1.500 | D15 | 1.5 |
| 0.0315-0.0787 | 0.800-2.000 | D18 | 2.0 |
| 0.0315-0.0787 | 0.800-2.000 | D18 | 2.0 |
| 0.0472-0.1181 | 1.200-3.100 | D21 | 3.1 |
| 0.0472-0.1181 | 1.200-3.100 | D21 | 3.1 |
| 0.0591-0.1732 | 1.500-4.400 | D24 | 4.4 |
| 0.0591-0.1732 | 2.000-4.400 | D24 | 4.4 |
| 0.1299-0.2126 | 3.300-5.400 | D27 | 5.4 |
| 0.1299-0.2183 | 3.300-5.800 | D27 | 5.8 |
| 0.2008-0.2992 | 5.100-7.600 | D30 | 7.6 |
| 0.3150-0.4331 | 8.000-11.000 | D33 | 11.0 |
| 0.3150-0.4409 | 8.000-11.200 | D30 | 11.2 |
| 0.3150-0.4724 | 8.000-12.000 | D33 | 12.0 |
| 0.3150-0.4921 | 8.000-12.500 | D33 | 12.5 |
| 0.3150-0.5000 | 8.000-12.700 | D36 | 12.7 |
3. Application:
Tin Coating Dies' special titanium casing make the dies float on the tin solution and then finish the tin coating process. And the big die exit make the tin solution not stain on the casing.
4. Advantage:
Inner hole is not easy to be blocked
Long life time
Good tin coating effect
Predictable wire surface